Found 90 Results For "

nema4 humidity transmitter

Room Integrated Temperature Humidity Sensor With Smooth Flat Surface

humidity temperature room temperature humidity sensor Description The integrated temperature and humidity transmitter uses a digital integrated sensor as the probe and is equipped with a digital processing circuit to convert the temperature and relative humidity in the environment into corresponding standard analog signals, 4-20mA, 0-5V or 0-10V. It has the characteristics of small size, light weight, wide range, etc., and is widely used in various fields that need to measure

RS485 LCD Display Air Velocity Transmitter For Electronic Field

RS485 LCD display air velocity transmitter for electronic field Description The KAV110 series wind speed transmitter is equipped with a microcontroller in order to accurately calibrate the whole process data, and digitally display the linear compensation and temperature compensation, so that the transmitter will have high precision and the measured data will be more accurate. Specification Model KAV110 Power supply 16-24VAC or VDC output 4-20mA/ 0-5V/ 0-10V/ RS-485 Operating

RS485 4-20mA Digital Temperature Transmitters HVAC

RS485 4-20mA Digital Temperature Transmitters HVAC Description KTH500 temperature Transmitter Air Duct Mounted 4-20 mA Output Digital Temperature Transmitter IP65 KTH500 uses a new generation of digital sensors, with a temperature accuracy of 0.3C, harsh environment testing, aging testing and accuracy calibration before shipment to make the detection data more accurate and stable. KTH500 temperature transmitters can be used to measure temperature in various HVAC applications

0-10V temperature & humidity transmitter HVAC

0-10V temperature & humidity transmitter HVAC Description KTH500 temperature and humidity transmitter is a transmitter designed with display. The backlight LCD display can make customers clearly observe the changes of temperature and humidity in places with poor light. At the same time, it can be installed according to different installation methods of customers. Available in wall and duct and cable versions. Feature LCD display Large size backlight display Shell connected by

0-10 3 wire temp humidity transmitter -30~80℃

0-10 3 wire temp humidity transmitter -30~80 Description KTH510 series temperature and humidity transmitter is a high-precision temperature and humidity transmitter, which can accurately measure relative humidity and temperature. At the same time, it has a DIP switch to adjust the temperature range and output mode, which can effectively reduce the cost of use and can meet different requirements. Therefore, it can meet a variety of customer needs. Feature Shell connected by

4-20mA 2 wire high temperature humidity transmitter

4-20mA 2 wire high temperature humidity transmitter Description KTH510 series temperature and humidity transmitter is a transmitter without display. It is specially designed for customers who do not need display. It can not only adjust the temperature range through the DIP switch, but also adjust the temperature through the DIP switch. The output method is convenient for customers to choose according to the actual application, which effectively reduces the cost of customers.

KTH400 Temperature and Humidity Transmitter with IP65 Protection RS485 Output and Wide Application Range

KTH400 Temperature And Humidity Transmitter Product Overview The KTH400 Temperature and Humidity Transmitter is designed for precise environmental monitoring in various industrial and commercial applications. Measurement Media Air, neutral gases, dry gases, and other gases Range Temperature: -30 to +70Humidity: 0 to 100%RH Output Signal 4-20mA, 0-5V, 0-10V, RS485 (Modbus RTU) Power Supply 16-30VAC/DC Accuracy Temperature: 0.3Humidity: 3% Protection Rating IP65/NEMA4

KTH500 IP65/NEMA 4 Temperature and Humidity Transmitter with 4-20mA Output and LCD Backlight Display

KTH500 Temperature and Humidity Transmitter Product Overview The KTH500 Temperature and Humidity Transmitter is designed for precise environmental monitoring in various industrial and commercial applications. Technical Specifications Measurement Media Air, neutral gases, dry gases, and other gases Range Temperature: -30 to +70Humidity: 0 to 100%RH Output Signal 4-20mA, 0-5V, 0-10V, RS485 (Modbus RTU) Power Supply 16-30VAC/DC Accuracy Temperature: 0.3Humidity: 3%

Air Duct Mounted Digital Temperature Transmitters 0-10V M16

Air Duct Mounted Digital Temperature Transmitters 0-10V M16 Description KTH500 temperature Transmitter Temperature Transmitter Air Duct Mounted 0-10V Output IP65 KTH500 temperature transmitters can be used to measure temperature in various HVAC applications, as well as monitor building energy management systems. This series of products includes duct-mounted transmitters. KTH500 uses a new generation of digital sensors, with a temperature accuracy of 0.3C, harsh environment

6 7 8 9 10

Keram (Nanjing)ELECTRICAL Equipment Co., Ltd.

nema4 humidity transmitter